Issue:
Time Constant for older braking resistor I want to use with my ATV900.

Cause:
The ATV900 series drives requires a "time constant" setting when using a braking resistor.  This information is not available for older resistors.

Resolution:
It is recommended to use the braking resistors in the ATV900 catalog which have this value listed.  Resistors from older applications may not be compatible with the braking resistor/transistor system of the 900 series drive.  This information will not be available on some older resistors.

**

If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions: Frequently Asked Questions - Schneider Electric (se.com)

If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us at drive.products.support@se.com to create a case with our Technical Support Team.

If you are not located in North America, please contact your local Customer Care Center for assistance: Support | Schneider Electric Global (se.com)

Released for: Schneider Electric USA