Issue:
I want to limit the amount of amps I can draw from my AC input.
Product Line:
Conext SW/XW systems
Environment:
Conext SW/XW system with generator backup.
Cause:
Generator or AC input source has a current limit lower than what the inverter can handle, need to make sure it is not overloaded.
Resolution:
Go to the Inverter's menu Advanced Settings > AC settings, change the AC breaker size to the maximum you want the inverter to pull from your AC input. This will limit the inverter's pull and prevent any overload possible from your input.
I want to limit the amount of amps I can draw from my AC input.
Product Line:
Conext SW/XW systems
Environment:
Conext SW/XW system with generator backup.
Cause:
Generator or AC input source has a current limit lower than what the inverter can handle, need to make sure it is not overloaded.
Resolution:
Go to the Inverter's menu Advanced Settings > AC settings, change the AC breaker size to the maximum you want the inverter to pull from your AC input. This will limit the inverter's pull and prevent any overload possible from your input.
Released for: Schneider Electric USA
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.
