Issue
The Data Editor is open and all of the boxes on the right are checked and * is in the filter but no variables show up.

Product line
EcoStruxure Control Expert, Unity Pro

Resolution
There is likely a character that you cannot see in the filter line.  Both screen captures below are from the same project but the top one has a 'hidden' character or space in the filter. To the right of "Name =" Select All (CTRL+A) and Delete then add the * back in.


After this if all 4 checkboxes for EDT, DDT, IODDT, and Device DDT types are selected you should now see all of your variables:

If you are working with a M580 Safety CPU, make sure that you are in the correct Editor, there are 3 of them.

You can try resetting the projects windows by closing it, deleting its *.ztx file and then opening again.

As a last measure, you can try export to ZEF, open the ZEF rebuild and check again.

If this FAQ did not solve your issue, you can chat with us at chat with us or e-mail us at customer.services@se.com to create a case with our Technical Support Team.

If you are not located in North America, please contact your local Customer Care Center for assistance:
Support | Schneider Electric Global (se.com)

Released for:Schneider Electric USA