Analog output scaling is based on motor FLA programmed under motor current rating (IN)

The range can be adjusted from 50 to 500% as the inrush current draw may need to be accounted for during initial ramp up.

If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:

Frequently Asked Questions - Schneider Electric (se.com)

If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us at drive.products.support@se.com to create a case with our Technical Support Team.

If you are not located in North America, please contact your local Customer Care Center for assistance:

Support | Schneider Electric Global (se.com)

Released for:Schneider Electric USA