You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
First the networks must to be created by right clicking on Networks under Communication.
From the Unity I/O map double clicking on the Ethernet port will bring up a window asking the user to link a configured network to the card.
Right click on the particular network from the project tree shown in figure #1 and select Configure; the screen below will open. The Model Family must be chosen for the network. When the mouse is moved over the Model Family list a pop-up window will show the user which Family to choose for which type of network card.
Going back into the I/O map and double clicking on the port will now show available networks for that port.