Goals and Symptoms
This document will describe you how to configure TeSysT on a network Profibus with a PLC Siemens S300 station. The CPU is a CPU 315 - 2 DP with Profibus port embedded.
We use Simatic S7, STEP 7 V5.4 SP3. Into Simatic you have two sub-softwares to configure the Profibus Network : NetPro and HW Config.
NetPro: you define which kind of product you need on your Profibus network (TesysU, TesysT…)
HW Config:
-
- PLC hardware configuration
Configuration for each device Network (TesysT with or without expansion module, which control unit for TesysU and which information you want to exchange on the network)
- PLC hardware configuration
Causes and Fixes
This document will describe you how to configure TeSysT on a network Profibus with a PLC Siemens S300 station. The CPU is a CPU 315 - 2 DP with Profibus port embedded.
We use Simatic S7, STEP 7 V5.4 SP3. Into Simatic you have two sub-softwares to configure the Profibus Network : NetPro and HW Config.
NetPro: you define which kind of product you need on your Profibus network (TesysU, TesysT…)
HW Config:
-
- PLC hardware configuration
Configuration for each device Network (TesysT with or without expansion module, which control unit for TesysU and which information you want to exchange on the network)
- PLC hardware configuration
Released for: Schneider Electric Vietnam
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales enquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Centre
Find support resources for all your needs, in one place.
