You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue:
Display configuration on ATS22
Product Line:
Altistart 22, ATS22
Environment:
All models
Cause:
Display only shows RUN
Resolution:
With Run, ACC or DEC on the display, push the Enter button (ENT). You should see LCr1. Push Enter again to see the current for Phase A. Escape back to LCr1 and scroll down to see Phases B (LCr2) and phase C (LCr3).
Total current on all three phases is not available. You can only see the individual current values for each phase.
Display configuration on ATS22
Product Line:
Altistart 22, ATS22
Environment:
All models
Cause:
Display only shows RUN
Resolution:
With Run, ACC or DEC on the display, push the Enter button (ENT). You should see LCr1. Push Enter again to see the current for Phase A. Escape back to LCr1 and scroll down to see Phases B (LCr2) and phase C (LCr3).
Total current on all three phases is not available. You can only see the individual current values for each phase.
Released for: Schneider Electric Vietnam
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales enquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Centre
Find support resources for all your needs, in one place.
