You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue:
Configure an ATV12 to freewheel stop
Product Line:
Altivar 12
Environment:
All serial numbers
Cause:
N/A
Resolution:
To program an input to freewheel stop on the ATV12 use the following steps from RDY:
Press enter to rEf
Turn clockwise to ConF press enter.
Turn clockwise to Full press enter.
Turn clockwise to Fun press enter.
Turn clockwise to Stt- press enter.
Turn clockwise to nSt press enter.
Select the input to use for nSt press enter.
Esc back to the beginning and cycle power.
Configure an ATV12 to freewheel stop
Product Line:
Altivar 12
Environment:
All serial numbers
Cause:
N/A
Resolution:
To program an input to freewheel stop on the ATV12 use the following steps from RDY:
Press enter to rEf
Turn clockwise to ConF press enter.
Turn clockwise to Full press enter.
Turn clockwise to Fun press enter.
Turn clockwise to Stt- press enter.
Turn clockwise to nSt press enter.
Select the input to use for nSt press enter.
Esc back to the beginning and cycle power.
Released for: Schneider Electric Vietnam
