Issue:
Are there any IO expansions for the Magelis HMISCU HMI controller?

Product Line:
HMISCU, HMISCU8B5, HMISCU8A5, HMISCU6B5, HMISCU6A5, IO expansion, I/O expansion
EcoStruxure Machine Expert Software

Resolution:
The HMISCU does not have any IO expansion modules that connect directly to it, however now, there is a TM3 Bus Coupler Module that allows fast connectivity with TM3 I/O Modules.
The CANopen TM3 Bus Coupler - Part Number TM3BCCO connects to the embedded CANopen port on the HMISCU and is added from the Devices Tree under the CAN > CAN_Optimized node:



Underneath the TM3BC_CANopen node, TM3 Digital and Analog I/O Modules can be added:


From there, the TM3 I/O Modules can be configured and symbols can be mapped:


Also see the Catalog for TM3 Expansion IO Modules .



[Legacy Information]
Before the addition of the TM3 Bus Coupler in EcoStruxure Machine Expert, the previous options would have been to use:

1. Advantys OTB island
2. Advantys STB island
3. use a small PLC (M221) with a Magelis (HMISTU) instead of the HMISCU.

1. OTB1C0DM9LP - CANopen
2. OTB1S0DM9LP - Modbus
3. OTB1E0DM9LP - Ethernet MB-TCP/IP

Released for: Schneider Electric Vietnam