You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue:
Current (amp) range for the ATS48 parameter "In", Nominal Motor Current.
Product Line:
Altistart 48 ATS48
Environment:
All models
Cause:
Using an undersized motor on the ATS48
Resolution:
The In parameter range is .4 - 1.3 times the soft starter amp rating. This is typically set to the motor nameplate Full Load Amps and is used by the ATS48 for motor overload protection. If the motor FLA is below the range, then external overload protection is required.
The following video demonstrates how to program the In parameter on the ATS48:
Current (amp) range for the ATS48 parameter "In", Nominal Motor Current.
Product Line:
Altistart 48 ATS48
Environment:
All models
Cause:
Using an undersized motor on the ATS48
Resolution:
The In parameter range is .4 - 1.3 times the soft starter amp rating. This is typically set to the motor nameplate Full Load Amps and is used by the ATS48 for motor overload protection. If the motor FLA is below the range, then external overload protection is required.
The following video demonstrates how to program the In parameter on the ATS48:
Released for:Schneider Electric Vietnam
