You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue
Disabling COM port on ION8650 is desired so no communication can be done through that COM port for security reasons.
Product Line
ION8650A
ION8650B
ION8650C
Environment
ION Setup 3.0
ION8650 Communication port
Resolution
1) Upgrade firmware version for ION8650 meter to latest firmware version (Currently V4.20)
2) In ION Setup, in Setup Assistant, navigate to Communications -> Serial Settings. Choose the COM port tab that needs to disable. Change protocol for that COM port to "None"
Changing protocol can also be achieved from the front display of the meter. Go to ION8650 SETUP by holding "ALT/ENTER" button. Navigate to the COM port that needs to be disabled. Click "Enter" on PROTOCOL and change it to "NONE"
Disabling COM port on ION8650 is desired so no communication can be done through that COM port for security reasons.
Product Line
ION8650A
ION8650B
ION8650C
Environment
ION Setup 3.0
ION8650 Communication port
Resolution
1) Upgrade firmware version for ION8650 meter to latest firmware version (Currently V4.20)
2) In ION Setup, in Setup Assistant, navigate to Communications -> Serial Settings. Choose the COM port tab that needs to disable. Change protocol for that COM port to "None"
Changing protocol can also be achieved from the front display of the meter. Go to ION8650 SETUP by holding "ALT/ENTER" button. Navigate to the COM port that needs to be disabled. Click "Enter" on PROTOCOL and change it to "NONE"
Released for:Schneider Electric Vietnam
