You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue:
Early versions of the ATV600 and ATV900 drives only displayed time in seconds
Product Line:
Process Drive
Environment:
All models and serial numbers
Cause:
None
Resolution:
For ATV600 series drives with firmware V2.4 and less and ATV900 V2.1 and lower, it is not possible to change the motor related timers from seconds to minutes.
For more recent versions the time is available in Days/Hours/Minutes/Seconds format.
You can view the current values and reset the timers in the Counter Management menu.
Counter management can be found in menu 4.9.
The following counters can be monitored:
[Motor Run Time] - rtH
[Power-on Time] - PtH
[Fan Operation Time] - FCPt
Early versions of the ATV600 and ATV900 drives only displayed time in seconds
Product Line:
Process Drive
Environment:
All models and serial numbers
Cause:
None
Resolution:
For ATV600 series drives with firmware V2.4 and less and ATV900 V2.1 and lower, it is not possible to change the motor related timers from seconds to minutes.
For more recent versions the time is available in Days/Hours/Minutes/Seconds format.
You can view the current values and reset the timers in the Counter Management menu.
Counter management can be found in menu 4.9.
The following counters can be monitored:
[Motor Run Time] - rtH
[Power-on Time] - PtH
[Fan Operation Time] - FCPt
Released for:Schneider Electric Vietnam
