You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
How configure VMWare in mode NAT and SoMachine for M251 communication via ETH 2 port
Use the following method with the VMWare configured in NAT mode:
1. Configure SoMachine the communication via "active path":
2.In the Communication Settings window , add a gateway and use the IP address of the physique PC.
3.Select the new gateway and Scan it
4. Now you can connect to the M251
1. Configure SoMachine the communication via "active path":
2.In the Communication Settings window , add a gateway and use the IP address of the physique PC.
3.Select the new gateway and Scan it
4. Now you can connect to the M251
Released for: Schneider Electric Vietnam
