You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue:
Lonworks communication card part number option for the ATV212 drives.
Product Line:
Altivar 212, S-Flex with ATV212
Environment:
All
Cause:
Option card
Resolution:
VW3A21212 is the Lonworks option card.
The ATV21 and ATV212 have different part numbers and option cards for them, and cannot be used interchangeably.
This provides a four-screw terminal block for connection to Lonworks network. Install in place of standard control board that comes mounted in the Altivar 212 drive.
The I/O count is reduce to 3 logic inputs, 1 analog input and 1 NO/NC relay.
When this card VW3A21212 is installed the original control board is replaced and the original BACnet and Modbus communications are lost.
In case of an ATV212 S-Flex with LonWorks, the orginial control card with BacNet and Modbus is send together with the S-Flex, in case that the customer wants to go back with the original control card.
**Note: With this card installed, you have to write to this drive with Lonworks. You cannot monitor only.
Lonworks communication card part number option for the ATV212 drives.
Product Line:
Altivar 212, S-Flex with ATV212
Environment:
All
Cause:
Option card
Resolution:
VW3A21212 is the Lonworks option card.
The ATV21 and ATV212 have different part numbers and option cards for them, and cannot be used interchangeably.
This provides a four-screw terminal block for connection to Lonworks network. Install in place of standard control board that comes mounted in the Altivar 212 drive.
The I/O count is reduce to 3 logic inputs, 1 analog input and 1 NO/NC relay.
When this card VW3A21212 is installed the original control board is replaced and the original BACnet and Modbus communications are lost.
In case of an ATV212 S-Flex with LonWorks, the orginial control card with BacNet and Modbus is send together with the S-Flex, in case that the customer wants to go back with the original control card.
**Note: With this card installed, you have to write to this drive with Lonworks. You cannot monitor only.
Released for:Schneider Electric Vietnam
