You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue:
Change unit of torque to "Foot Pounds" on Altivar Process Drives ATV630/930
Product Line:
ATV630, ATV690 series drives.
Environment:
All models with firmware 1.6 or below.
Cause:
Information unavailable in current literature.
Resolution:
Currently, it is not possible to display torque as foot pounds on the ATV630 and ATV930 series drives. This information is current as of firmware release 1.6. An evolution has been created to have this feature added via a future firmware update. There is no ETA for this firmware release.
Change unit of torque to "Foot Pounds" on Altivar Process Drives ATV630/930
Product Line:
ATV630, ATV690 series drives.
Environment:
All models with firmware 1.6 or below.
Cause:
Information unavailable in current literature.
Resolution:
Currently, it is not possible to display torque as foot pounds on the ATV630 and ATV930 series drives. This information is current as of firmware release 1.6. An evolution has been created to have this feature added via a future firmware update. There is no ETA for this firmware release.
Released for:Schneider Electric Vietnam
