You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
The meter is factory-configured with the following default serial communications
settings:
• Protocol = Modbus RTU
• Address = 1
• Baud rate = 19200
• Parity = Even
You can use a communications converter (USB to RS-485 or RS-232 to RS-485)
device to connect to the meter.
settings:
• Protocol = Modbus RTU
• Address = 1
• Baud rate = 19200
• Parity = Even
You can use a communications converter (USB to RS-485 or RS-232 to RS-485)
device to connect to the meter.
Released for:Schneider Electric Vietnam
