You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue:
Getting a OCF Overcurrent Fault on ATV630 or ATV930.
Product Line:
Altivar AC Drive Process Drive ATV320 ATV71 ATV600 ATV900
Environment:
All
Cause:
Motor pulling higher than nameplate Full Load Amps for an extended period of time
Resolution:
Typically, this can be resolved by adjusting the Motor Control Parameters, and ensuring the motor nameplate information was entered correctly. Motor Control Parameters vary by application.
If adjusting these parameters does not resolve the issue, you need to determine whether the drive and/or motor is correctly sized to be able to handle the load.
Getting a OCF Overcurrent Fault on ATV630 or ATV930.
Product Line:
Altivar AC Drive Process Drive ATV320 ATV71 ATV600 ATV900
Environment:
All
Cause:
Motor pulling higher than nameplate Full Load Amps for an extended period of time
Resolution:
Typically, this can be resolved by adjusting the Motor Control Parameters, and ensuring the motor nameplate information was entered correctly. Motor Control Parameters vary by application.
If adjusting these parameters does not resolve the issue, you need to determine whether the drive and/or motor is correctly sized to be able to handle the load.
Released for:Schneider Electric Vietnam
