You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue:
ATV320 drive in RDY state, not allowing programming changes
Product Line:
ATV320
Environment:
All serial numbers
Cause:
Can't reset the drive to factory default
Resolution:
Verify Function block is disabled. ATV32 / 320 – Disable Function Blocks - To turn off the function blocks Go to the FULL menu enter Fbn enter > FbCd enter and set this to STOP Now you can go back to the factory settings ConF > FCS > FCS1 = InI, FrY – InI, GFS – YES (2s) (all 3 in this order)
ATV320 drive in RDY state, not allowing programming changes
Product Line:
ATV320
Environment:
All serial numbers
Cause:
Can't reset the drive to factory default
Resolution:
Verify Function block is disabled. ATV32 / 320 – Disable Function Blocks - To turn off the function blocks Go to the FULL menu enter Fbn enter > FbCd enter and set this to STOP Now you can go back to the factory settings ConF > FCS > FCS1 = InI, FrY – InI, GFS – YES (2s) (all 3 in this order)
Released for:Schneider Electric Vietnam
