You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
The PM1130H meter is factory-configured with default serial communications settings that
you may need to modify before connecting the meter to the RS-485 bus.
The meter is factory-configured with the following default serial communications settings:
• Protocol = Modbus RTU
• Address = 1
• Baud rate = 19200
• Parity = Even
you may need to modify before connecting the meter to the RS-485 bus.
The meter is factory-configured with the following default serial communications settings:
• Protocol = Modbus RTU
• Address = 1
• Baud rate = 19200
• Parity = Even
Released for:Schneider Electric Vietnam
