You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Is there an averaging block for an analog signal?
Issue
Using Concept, Unity Pro or Control Expert is there a block that can be used for a moving average?
Product line
Concept, Unity Pro, Control Expert
Resolution
The AVGMV or AVGMV_K blocks could be used. They take in a REAL input and allow the user to define the number of scans that will buffer before averaging. If the analog signal is not REAL, use standard conversion blocks such as W_INT_REAL and REAL_TO_WORD.
These blocks are part of the included CONT_CTL library and not a library that needs to be installed separately.
Using Concept, Unity Pro or Control Expert is there a block that can be used for a moving average?
Product line
Concept, Unity Pro, Control Expert
Resolution
The AVGMV or AVGMV_K blocks could be used. They take in a REAL input and allow the user to define the number of scans that will buffer before averaging. If the analog signal is not REAL, use standard conversion blocks such as W_INT_REAL and REAL_TO_WORD.
These blocks are part of the included CONT_CTL library and not a library that needs to be installed separately.
Released for: Schneider Electric Vietnam
