You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue:
Equipment with different mounting depths needs to be mounted into a cabinet.
Product Line:
NetShelter SX
Environment:
All versions and serial ranges.
Cause:
Need to know if the recessed rail kits must be used between the original full height rails, or if full height replacement rails will work.
Resolution:
Always use recessed rail kits to install equipment of differing depths.
The original full height mounting rails should be used for the front and rear rails.
Any rails installed between the original full height rails should be the recessed rail kits.
Equipment with different mounting depths needs to be mounted into a cabinet.
Product Line:
NetShelter SX
Environment:
All versions and serial ranges.
Cause:
Need to know if the recessed rail kits must be used between the original full height rails, or if full height replacement rails will work.
Resolution:
Always use recessed rail kits to install equipment of differing depths.
The original full height mounting rails should be used for the front and rear rails.
Any rails installed between the original full height rails should be the recessed rail kits.
Released for:Schneider Electric Vietnam
