You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
How to set the output frequency to show on the ATV320 display every time drive is powered on?
Issue:
Change the default display for when the drive is powered on to show output frequency.
Product Line:
Altivar Machines, Altivar 320
Environment:
All models and serial numbers
Cause:
Default display is Reference Frequency
Resolution:
Go to Non (1.2 Monitoring) menu, select rFr (output frequency), and press and hold ENT for more than 2 seconds. Display will flash to indicate the change had been made.
To dispaly amperage: Go to NON > select NNO > LCr, ENT for more than 2 seconds
Change the default display for when the drive is powered on to show output frequency.
Product Line:
Altivar Machines, Altivar 320
Environment:
All models and serial numbers
Cause:
Default display is Reference Frequency
Resolution:
Go to Non (1.2 Monitoring) menu, select rFr (output frequency), and press and hold ENT for more than 2 seconds. Display will flash to indicate the change had been made.
To dispaly amperage: Go to NON > select NNO > LCr, ENT for more than 2 seconds
Released for: Schneider Electric Vietnam
