You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Issue:
Will the firmware upgrade process on my APC PDU cause the unit to stop supplying power to its outlets?
Product Line:
APC Rack PDU - AP7***B, AP8*** and APDU9***
Cause:
As long as the PDU is operating normally and there are no active alarms, a firmware upgrade of the management interface will not power on/off any attached loads.
The network management card will reboot during the process, but this will not affect the attached load.
Released for: Schneider Electric Vietnam
