You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
The goal of this article is to explain How to use the Network Configurator tool on an HMI BSC.
This article is applicable for HMI BSC boxrunning on Yocto Linux (example: HMIBSCEA53D1L0T)
OS: Yocto Linux SE build V1.00.012 or higher (SV: 3.0 or higher)
The BSC Network Configurator is a Web Interface to remotely configure the network interfaces of an HMI BSC box.
The BSC Network Configurator resolves two pain points:
- The need to connect keyboard and screen to the box to configure it
- The complexity of configuring the network interfaces by modifying Linux configuration file
Please find the document attached.
This article is applicable for HMI BSC boxrunning on Yocto Linux (example: HMIBSCEA53D1L0T)
OS: Yocto Linux SE build V1.00.012 or higher (SV: 3.0 or higher)
The BSC Network Configurator is a Web Interface to remotely configure the network interfaces of an HMI BSC box.
The BSC Network Configurator resolves two pain points:
- The need to connect keyboard and screen to the box to configure it
- The complexity of configuring the network interfaces by modifying Linux configuration file
Please find the document attached.
Released for:Schneider Electric Vietnam
