You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Based on the switchgear room layout, enclosures needs to be arranged in a way that it fits in the switchgear room. One such combination is in L-shape combination in PrismaSeT I.
Enclosures can be combined in L-shape or at right angles using IP30 right angle kit as shown in below image.
Fig. 1
It should be noted that the busbar needs to be cut as per specified dimensions and arranged as per below image using fish plates. Please refer to the latest files in TTF.
Fig. 2
Released for: Schneider Electric Vietnam
