You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
X = Actual value to be displayed
Y = Original M1 LRV value
- Press the NEXT button and the word RERANGE will be displayed.
- Press ENTER and M1URV will be displayed
- Press NEXT and M1LRV will be displayed
- Make note of this value as the “Y” value
- Press ENTER and left hand most digit will blink. Press NEXT until this digit is equal to the most significant digit of the “X” value
- Press ENTER and the next digit will flash
- Press NEXT until this digit matches the value of the next most significant digit of the X value. Repeat procedure for the remaining digits until the entire X value has been entered
- Press ENTER and Place DP will be displayed
- Press NEXT until the decimal point is in the correct location
- Press ENTER and CANCEL will be displayed
- Press NEXT and SAVE will be displayed
- Press ENTER and device will be returned to Measurement Display
- Press the NEXT button 3 times and CALIB will be displayed
- Press ENTER and display will indicate CAL AT0
- Press next and display will indicate CAL LRV
- Press the ENTER button and display will indicate CAL WAIT and then display LRVdone
- Press NEXT 6 times and SAVE will be displayed
- Press Enter
- Press the NEXT button and the word RERANGE will be displayed.
- Press ENTER and M1URV will be displayed
- Press NEXT and M1LRV will be displayed
- Press ENTER and left hand most digit will blink. Press NEXT until this digit is equal to the most significant digit of the “Y” value
- Press ENTER and the next digit will flash
- Press NEXT until this digit matches the value of the next most significant digit of the Y value. Repeat procedure for the remaining digits until the entire Y value has been entered
- Press ENTER and Place DP will be displayed
- Press NEXT until the decimal point is in the correct location
- Press ENTER and CANCEL will be displayed
- Press NEXT twiceand SAVE will be displayed
- Press ENTER and device will be returned to Measurement Display
- Complete
Released for: Schneider Electric Vietnam
Discontinued
Discontinued
Discontinued
Discontinued
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales enquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Centre
Find support resources for all your needs, in one place.
