You are currently viewing the content available in Vietnam. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
To create a new switchboard, do the following:
- Click Create a switchboard under List view.
- Update the following fields under the ELECTRICAL CHARACTERISTICS
section:
-
- Switchboard name: * Enter a name for the switchboard.
- Rated current - In [A]:Enter the rated current value.
- Short circuit current - Isc [kA]: Enter the short circuit current value for Isc1 (single phase short circuit intensity) and Isc3 (three phase short circuit intensity) value.
- Click Create.
Note: Fields marked with (*) are mandatory to fill.
You can create multiple switchboards in the same project using the steps mentioned above. After creating a switchboard, you can:
-
- Easily organize the electrical network by selecting switchgear.
- Save configurations for future use.
- Use the Duplicate option to re-use switchgears, speeding up switchboard configuration.
Create a New Switchboard
Released for: Schneider Electric Vietnam
