ETL Job shows successful but outputs no data to .csv file when running a PME Extract to Load csv task
Issue
When running an ETL job to extract PME data and load to .csv, the job shows successful but the .csv file is blank
Product Line
Power Monitoring Expert 8.x
Power Monitoring Expert 9.0
Power Monitoring Expert 2020
Power Monitoring Expert 2021
Power Monitoring Expert 2022
Power Monitoring Expert 2023
Power Monitoring Expert 2024
Environment
ETL 6.0
Cause
If the Collections parameter of the Load .csv task is not filled out then it will exhibit these symptoms
Resolution
When configuring the Load task, make sure to include data parameters
- Click on the input tab of the Field Definition
- Select input parameter( This example simply has Source Quantity and Date Time)
3. Save the job and run it and you will see the data