How to test if a TCP port is open or closed
Issue
When connecting to an Ethernet device or other computer, it responds to ping, but there is still a connection problem.
Environment
Ethernet connections
PowerShell
Resolution
1. Open PowerShell.
2. Run the command below to test the port:
- tnc <ip address> -port <port number>
For example, to test Modbus port 502 to an Ethernet-connected PM5500 with IP address 10.0.0.83:
- tnc 10.0.0.83 -port 502
The result above indicates the IP address responds to ping, but doesn't respond over port 502.
To resolve, ensure the port is allowed/enabled:
- In the computer's local firewall settings
- In the network firewall between the computer and the device
- In the device's settings
If the above is true and the tnc command still shows False for the port, confirm if the IP address is correct and whether the device supports the port/protocol you are testing.
Example test indicating the port is open:
Example test indicating the IP address isn't responding to ping: