sub-base - soldered electromechanical relays ABE7 - 16 channels - relay 10 mmShow more characteristics >
Main range of productAdvantys Telefast ABE7 product or component typeElectromechanical output relay sub-base [Us] rated supply voltage24 V DC (PLC end) number of channels16 number of terminal per channel2 Complementary terminal block typeRemovable polarity distributionVolt-free fixing modeBy clips on 35 mm symmetrical DIN railBy screws on solid plate with fixing kit width206 mm current per output common<= 10 A current per channel5 A (preactuator end) minimum switching current10 mA at >= 5 V drop-out voltage2.4 V at 20 °C (PLC end) switching frequency<= 0.5 Hz<= 10 Hz threshold tripping voltageAt 40 °C drop-out current1 mA at 20 °C power dissipation per channel in W<= 0.36 W (PLC end) contacts type and composition1 NO (preactuator end) maximum switching voltage250 V AC 50/60 Hz conforming to IEC 60947-5-130 V DC conforming to IEC 60947-5-1 electrical durability500000 cycles, maximum switching current: 1500 mA at 230 V AC-12 (preactuator end)500000 cycles, maximum switching current: 1500 mA at 24 V DC-12 (preactuator end)500000 cycles, maximum switching current: 600 mA at 24 V DC-13 10 ms (preactuator end)500000 cycles, maximum switching current: 900 mA at 230 V AC-15 (preactuator end) electrical reliability1e-008 operating time<= 10 ms between coil energisation and NO closing<= 5 ms between coil de-energisation and NO opening contact bounce time<= 5 ms 1 NO operating rate in Hz10 Hz no load0.5 Hz at Ie mechanical durability20000000 cycles [Uimp] rated impulse withstand voltage2.5 kV conforming to IEC 60947-1 [Ui] rated insulation voltage2000 V installation categoryII conforming to IEC 60664-1 tightening torque0.6 N.m (withflat Ø 3.5 mm product weight0.405 kg Environment max immunity to microbreaks<= 5 ms dielectric strength2000 V conforming to IEC 60947-1 product certificationsBVCSADNVGLLROS (Lloyds register of shipping)UL IP degree of protectionIP2x conforming to IEC 60529 protective treatmentTC resistance to incandescent wire750 °C, extinction time: < 30 s conforming to IEC 60695-2-11 shock resistance15 gn for 11 ms conforming to IEC 60068-2-27 resistance to radiated fields10 V/m (26000000...1000000000 Hz) conforming to IEC 61000-4-3 level 3 resistance to fast transients2 kV conforming to IEC 61000-4-4 level 3 ambient air temperature for operation-5...60 °C conforming to IEC 61131-2 ambient air temperature for storage-40...80 °C conforming to IEC 61131-2 pollution degree2 conforming to IEC 60664-1 Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profile Product end of life instructionsAvailable Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CADSizeAdd to My DocumentsPremium automation platform - Telefast 2 - Sub-basesEnd of life manualSizeAdd to My Documents
No results foundUnfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)ABE7BV20 / ABE7BV20E
a in mm
a in in.
R16S111 / R16S111E
R16S21 / R16S21•E
Mounting and ClearanceMounting
Connections and SchemaHE10 16 ChannelsWiring Diagram(1)Inductive load
Performance CurvesCurves for Determining Cable Type and Length According to the Current16-channel Sub-baseLCable lengthITTotal current per sub base (A)IAAverage current per channel (mA)(1)TSXCDP••2 and ABFH20H••0 cables with c.s.a. 0.08 mm2 (AWG 28).(2)TSXCDP••3 cables with c.s.a. 0.34 mm2 (AWG 22).(3)Cables with c.s.a. 0.13 mm2 (AWG 26).
The curves are given for a voltage drop of 1 V in the cable. For n volts tolerance, multiply the length determined from the graph by n.Electrical Durability (in Millions of Operating Cycles) Conforming to IEC 60947-5-1
Multiply all durability values by 0.75 for ABR7S23.DC Loads
DC12 curvesDC12control of resistive loads and of solid state loads isolated by optocoupler, l/R ≤ 1 ms.
DC13 curvesDC13switching electromagnets, L/R ≤ 2 x (Ue x Ie) in ms, Ue: rated operational voltage, Ie: rated operational current (with a protective diode on the load, DC12 curves must be used with a coefficient of 0.9 applied to the number in millions of operating cycles)AC Loads
AC12 curvesAC12control of resistive loads and of solid state loads isolated by optocoupler, cos ϕ ≥ 0.9.
AC14 curvesAC14control of small electromagnetic loads ≤ 72 VA, make: cos ϕ = 0.3, break: cos ϕ = 0.3.
AC15 curvesAC15control of electromagnetic loads > 72 VA, make: cos ϕ = 0.7, break: cos ϕ = 0.4.