Sub-base with plug-in electromechanical relay ABE7 - 16 channels - relay 5 mmShow more characteristics >
Main range of productAdvantys Telefast ABE7 product or component typeSub-base with plug-in electromechanical relay sub-base typeOutput sub-base [Us] rated supply voltage19...30 V conforming to IEC 61131-2 number of channels16 connections - terminalsScrew type terminals, clamping capacity: 1 x 0.14...1 x 2.5 mm² AWG 26...AWG 14 flexible without cable endScrew type terminals, clamping capacity: 1 x 0.14...1 x 1.5 mm² AWG 26...AWG 16 flexible with cable endScrew type terminals, clamping capacity: 1 x 0.14...1 x 4 mm² AWG 26...AWG 12 solidScrew type terminals, clamping capacity: 2 x 0.14...2 x 0.75 mm² AWG 26...AWG 18 flexible with cable endScrew type terminals, clamping capacity: 2 x 0.14...2 x 1.5 mm² AWG 26...AWG 16 solid Complementary supply circuit typeDC product compatibilityABR7S11 contacts type and composition1 NO status LED1 LED for power ON1 LED per channel for channel status polarity distributionCommon distribution group of 4 short-circuit protection1 A internal fuse, 5 x 20 mm, fast blow (PLC end) mounting modeBy clips on 35 mm DIN railBy screws on surface mount with kit supply current<= 1 A voltage drop on power supply fuse0.3 V current per output common<= 5 A screw type terminals [Ui] rated insulation voltage2000 V between terminals/mounting rails300 V between coil circuit/contact circuits conforming to IEC 60947-1 current per module<= 12 A [Uimp] rated impulse withstand voltage2.5 kV installation categoryII conforming to IEC 60664-1 tightening torque0.6 N.m (with flat Ø 3.5 mm) product weight0.6 kg Environment product certificationsBVCSADNVGLLROS (Lloyds register of shipping)UL IP degree of protectionIP2x conforming to IEC 60529 resistance to incandescent wire750 °C, extinction time: <= 30 s conforming to IEC 60695-2-11 shock resistance15 gn for 11 ms conforming to IEC 60068-2-27 vibration resistance2 gn (f = 10...150 Hz) conforming to IEC 60068-2-6 resistance to electrostatic discharge4 kV (contact) conforming to IEC 61000-4-2 level 38 kV (air) conforming to IEC 61000-4-2 level 3 resistance to radiated fields10 V/m (26000000...1000000000 Hz) conforming to IEC 61000-4-3 level 3 resistance to fast transients2 kV conforming to IEC 61000-4-4 level 3 ambient air temperature for operation-5...60 °C conforming to IEC 61131-2 ambient air temperature for storage-40...80 °C conforming to IEC 61131-2 pollution degree2 conforming to IEC 60664-1 Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profile Product end of life instructionsAvailable Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CADSizeAdd to My DocumentsEnd of life manualSizeAdd to My Documents
No results foundUnfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)ABE7BV10 / BV20
Mounting and ClearanceMounting
Connections and SchemaHE10 16 ChannelsWiring Diagram(1)Inductive load(2)ABR7S11 (1F) - N/O Ith = 6 A (supplied for ABE7R16T111 and not supplied for ABE7P16T111)(3)ABS7SC1B 24 V DC Imax. = 2 A (not supplied)
Performance CurvesCurves for Determining Cable Type and Length According to the Current16-channel Sub-baseLCable lengthITTotal current per sub base (A)IAAverage current per channel (mA)(1)TSXCDP••2 and ABFH20H••0 cables with c.s.a. 0.08 mm2 (AWG 28).(2)TSXCDP••3 cables with c.s.a. 0.34 mm2 (AWG 22).(3)Cables with c.s.a. 0.13 mm2 (AWG 26).
The curves are given for a voltage drop of 1 V in the cable. For n volts tolerance, multiply the length determined from the graph by n.Electrical Durability (in Millions of Operating Cycles) Conforming to IEC 60947-5-1DC Loads
DC12 curvesDC12control of resistive loads and of solid state loads isolated by optocoupler, l/R ≤ 1 ms.(1)Resistive loads(2)Inductive loads
DC13 curvesDC13switching electromagnets, L/R ≤ 2 x (Ue x Ie) in ms, Ue: rated operational voltage, Ie: rated operational current (with a protective diode on the load, DC12 curves must be used with a coefficient of 0.9 applied to the number in millions of operating cycles)AC Loads
AC12 curvesAC12control of resistive loads and of solid state loads isolated by optocoupler, cos ϕ ≥ 0.9.
AC15 curvesAC15control of electromagnetic loads > 72 VA, make: cos ϕ = 0.7, break: cos ϕ = 0.4.