What does the wrench errors mean on SEPAM relays?
Issue
User observes wrench symbols or error indications on the front display of Sepam relays and requires clarification on their meaning.
Product
Sepam 20 Series
Sepam 40 Series
Sepam 80 Series
Environment
Relay front display interface
Cause
Wrench symbols on the Sepam relay front display indicate maintenance, configuration, or internal diagnostic errors. These alerts are generated by the relay to notify the user of conditions that require attention, such as configuration mismatches, hardware issues, or self-diagnostic faults.
Resolution
The specific meaning of each wrench error depends on the associated code displayed on the relay.
To resolve:
- Refer to the provided documentation listing wrench error codes and their corresponding remedies attached to the present article.
- Identify the exact error code shown on the relay display
- Follow the recommended corrective action for that specific code
Typical actions may include:
- Verifying and correcting configuration settings
- Checking wiring or hardware connections
- Resetting alarms after resolving the issue
- Performing maintenance or contacting technical support if required
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.