How to connect 3-Wire Modbus to an ION Meter

Question

Accepted Answer

The Shield and GND (ground) connections are internally connected in an ION meter using a diode bridge.
Wiring diagram

This is the best wiring solution for connecting a 3-Wire RS-485 device to an ION Meter (COM1 or COM2).

NOTE: The fourth wire (Shield) should still be present in the communication wire bundle, but left unconnected at the ION meter.

How to connect 3-Wire Modbus to an ION Meter

Released for: Schneider Electric Canada

Support

Company

Product Resources

Quick Links

Partners

Industries

Insights
opens new tab

Accessibility

How to connect 3-Wire Modbus to an ION Meter

Released for: Schneider Electric Canada

Support

Company

Product Resources

Quick Links

Partners:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Industries:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Insights:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}opens new tab

Accessibility:host([hidden]){display:none!important}:host{display:inline-block;height:1em;width:1em}.qds-container{position:relative}.qds-icon-wrapper{display:contents}svg{display:block;fill:currentcolor;height:100%;width:100%}

Partners

Industries

Insights
opens new tab

Accessibility