NQ main lugs only panelboard labels are upside down
Issue:
Labeling on NQ Main Lugs Panelboard
Product Line:
Panelboards
Environment:
UL 67, UL 50, CSA C22.2 No.'s 20-M1989 & 94-M91, NEMA PB1, NFPA 70 Art. 408, Federal Specification W-P-115C Type 1 Class 1 , 2003 IBC, NFPA 5000, ASCE/SE17
Cause:
A change in direction of feed for NQ main lugs only panelboards may result in upside down labels.
Resolution:
There are three labels on the dead front of an NQ main lugs only panelboard.
There is a blue identifying NQ label, which is affixed to the branch breaker portion of the dead front. Although this label cannot be removed, the branch breaker portion of the dead front is fully symmetrical, and it can be disassembled from the adjacent dead front components to which it is attached, rotated, and then reattached so that the blue identifying label is right-side-up and readable.
The other two labels, the Danger and Warning labels are affixed to the main lug cover portion of the dead front. The Danger and Warning labels are pre-attached in all ready-to-install interiors so that they are readable/right-side-up when the interior is oriented for bottom feed. Although the ready-to-install interior (and any factory assembled interior configured for bottom feed) may be inverted in the field for top feed, these two labels will then be upside down. Replacement labels can be obtained. Order replacement label kit # PKDGWG
It contains one of each.
Labeling on NQ Main Lugs Panelboard
Product Line:
Panelboards
Environment:
UL 67, UL 50, CSA C22.2 No.'s 20-M1989 & 94-M91, NEMA PB1, NFPA 70 Art. 408, Federal Specification W-P-115C Type 1 Class 1 , 2003 IBC, NFPA 5000, ASCE/SE17
Cause:
A change in direction of feed for NQ main lugs only panelboards may result in upside down labels.
Resolution:
There are three labels on the dead front of an NQ main lugs only panelboard.
There is a blue identifying NQ label, which is affixed to the branch breaker portion of the dead front. Although this label cannot be removed, the branch breaker portion of the dead front is fully symmetrical, and it can be disassembled from the adjacent dead front components to which it is attached, rotated, and then reattached so that the blue identifying label is right-side-up and readable.
The other two labels, the Danger and Warning labels are affixed to the main lug cover portion of the dead front. The Danger and Warning labels are pre-attached in all ready-to-install interiors so that they are readable/right-side-up when the interior is oriented for bottom feed. Although the ready-to-install interior (and any factory assembled interior configured for bottom feed) may be inverted in the field for top feed, these two labels will then be upside down. Replacement labels can be obtained. Order replacement label kit # PKDGWG
It contains one of each.
Released for: Schneider Electric Canada
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and en expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.