E-flex / M-Flex will not pull in the line contactor. What are some possible remedies?

Issue:
E-flex / M-Flex not pulling in the line contactor.

Resolution:

Possible remedies:

• Check to see if the line contactor will pull in, in the "test" mode (test/normal switch)
• Check that the OL relay is not tripped.
• Check that the drive is getting a run command (contactor closes with the command).
• Check all wiring for any loose connections.
• Check the control wiring for loose/open connections.
• If more assistance is needed contact  Drives Technical Support Group.

If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:

Frequently Asked Questions - Schneider Electric (se.com)

If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us atdrive.products.support@se.comto create a case with our Technical Support Team.

If you are not located in North America, please contact your local Customer Care Center for assistance:

Support | Schneider Electric Global (se.com)

Released for: Schneider Electric Canada