Issue:
Trip indicator lights on Micrologic

Product Line:
Circuit Breakers

Resolution:
Ir: The Ir long-time pickup and delay levels were exceeded.
Isd/ Ii: The Isd short time pickup or the Ii instantaneous pickup was exceeded.
Ig: The Ig ground fault pickup level and delay levels were exceeded.
Ap: The self-protection indicator light lights when the trip unit causes the breaker to trip for a reason other than an overcurrent on the Ir, Ii, Isd, or Ig functions.
The Ap light can indicate:
* issue with internal current sensors, usually moisture or corrosion
* The instantaneous override level is exceeded
* fail-safe protection for the circuit in case of the trip unit malfunction
* trip unit temperature approaches 90°C
* overvoltage on 24 Vdc inputs F1-F2

Related Links
FA176046: Determining the cause of breaker tripping with Ap light indication on the Micrologic trip unit
Instruction Bulletin 48049-136-05:  Micrologic 2.0A, 3.0A, 5.0A, and 6.0A Electronic Trip Units

Released for: Schneider Electric Canada