How to change the relay configuration on an ATS22?
Issue:
Relay R1 and R2 programming on an ATS22
Product Line:
Altistart 22
Environment:
All
Cause:
Relay 1 or 2 needs a new assignment.
Resolution:
First, open access to the IO menu by going to the ConF menu, set LAC = ON.
Then go to the IO menu and set r1 or r2 to the appropriate configuration.
Relay R1 and R2 programming on an ATS22
Product Line:
Altistart 22
Environment:
All
Cause:
Relay 1 or 2 needs a new assignment.
Resolution:
First, open access to the IO menu by going to the ConF menu, set LAC = ON.
Then go to the IO menu and set r1 or r2 to the appropriate configuration.
Released for: Schneider Electric Canada
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and en expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.