How to wire a D-line contactor with spring terminals?
Issue:
Wiring process for LC1D Contactor with spring terminals
Product line:
Tesys D contactors
Environment:
Applies to contactors with spring terminals
Cause:
Customer wants to know how to wire a D-line contactor with spring terminals
Resolution:
Check attached picture and follow instructions below.
You need to use a flat head screwdriver to do the wiring.
1- Insert the screwdriver in the red marked arrows/rectangles applying some pressure to compress the spring
2- Insert the wire in the hole marked in blue
3- Remove the screwdriver to hold the wire in place.
4- Repeat steps 1, 2 and 3 for the remaining terminals
Wiring process for LC1D Contactor with spring terminals
Product line:
Tesys D contactors
Environment:
Applies to contactors with spring terminals
Cause:
Customer wants to know how to wire a D-line contactor with spring terminals
Resolution:
Check attached picture and follow instructions below.
You need to use a flat head screwdriver to do the wiring.
1- Insert the screwdriver in the red marked arrows/rectangles applying some pressure to compress the spring
2- Insert the wire in the hole marked in blue
3- Remove the screwdriver to hold the wire in place.
4- Repeat steps 1, 2 and 3 for the remaining terminals
Released for: Schneider Electric Canada
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and en expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.