Are alternate lugs available for the EZM3400CB, Series M01 main device?
Issue:
Optional wire sizes
Product Line:
EZ Meter-Pak Metering Equipment
Resolution:
The Standard Mechanical Lugs for an EZM3400CB, Series M01 include:
The Factory installed Main Circuit Breaker LHP36400 is supplied with the following Standard Lugs:
To accommodate: (1) 1/0 AWG to 600 kcmil OR (2) 1/0 AWG to 250 kcmil AL/CU Wires per Phase using (1) AL400LA Lug Kit per Phase(per pole).
The Line Side Neutral Assembly is supplied with the following Standard Lugs:
To accommodate: (1) 1/0 AWG to 600 kcmil OR (2) 1/0 AWG to 250 kcmil AL/CU Wires using (1) MMLK250 Lug Kit (Kit includes 3, 2-Barrel Lugs, only 1 of these 3 Lugs can be installed on the neutral)
The Alternate Lugs for the EZM3400CB, Series M01 include;
To accommodate (1) 750 kcmil Al/Cu wire Per phase for the Main breaker, need to use lug kit AL400LH7. This lug kit includes only ONE lug, so for the 3pole main breaker, need to order 3 Kits.
To accommodate (1) 750 kcmil Al/Cu wire for the Main Neutral, need to use (1) EZMSK2 Lug Landing Kit(purchase separately) and (1) TA8002N ILSCO Lug (purchase separately).
NOTE: the EZMSK2 kit comes with 4 - lug landing pads and the Main Neutral will ONLY accept 1 pad and 1 lug.
Optional wire sizes
Product Line:
EZ Meter-Pak Metering Equipment
Resolution:
The Standard Mechanical Lugs for an EZM3400CB, Series M01 include:
The Factory installed Main Circuit Breaker LHP36400 is supplied with the following Standard Lugs:
To accommodate: (1) 1/0 AWG to 600 kcmil OR (2) 1/0 AWG to 250 kcmil AL/CU Wires per Phase using (1) AL400LA Lug Kit per Phase(per pole).
The Line Side Neutral Assembly is supplied with the following Standard Lugs:
To accommodate: (1) 1/0 AWG to 600 kcmil OR (2) 1/0 AWG to 250 kcmil AL/CU Wires using (1) MMLK250 Lug Kit (Kit includes 3, 2-Barrel Lugs, only 1 of these 3 Lugs can be installed on the neutral)
The Alternate Lugs for the EZM3400CB, Series M01 include;
To accommodate (1) 750 kcmil Al/Cu wire Per phase for the Main breaker, need to use lug kit AL400LH7. This lug kit includes only ONE lug, so for the 3pole main breaker, need to order 3 Kits.
To accommodate (1) 750 kcmil Al/Cu wire for the Main Neutral, need to use (1) EZMSK2 Lug Landing Kit(purchase separately) and (1) TA8002N ILSCO Lug (purchase separately).
NOTE: the EZMSK2 kit comes with 4 - lug landing pads and the Main Neutral will ONLY accept 1 pad and 1 lug.
Released for: Schneider Electric Canada
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and en expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.