Trying to control or start the ATV61 drive using Somove the error message "The command is already active in another channel " comes up.
Issue:
Getting the message The Command is Already Active in Another Channel when trying to control the ATV61 or ATV71 in SoMove
Product Line:
Altivar ATV61 ATV71 with SoMove
Environment:
All
Cause:
Trying to control or start the drive using Somove the error message "The command is already active in another channel " comes up.
Resolution:
Check your Command status to see if HMI is the reference or command. On the ATV61 Drive check the F4 function key to see if you are in LOC or REM mode. If you are in LOC mode you will need to put the drive in REM mode before you can control it over Somove.
Getting the message The Command is Already Active in Another Channel when trying to control the ATV61 or ATV71 in SoMove
Product Line:
Altivar ATV61 ATV71 with SoMove
Environment:
All
Cause:
Trying to control or start the drive using Somove the error message "The command is already active in another channel " comes up.
Resolution:
Check your Command status to see if HMI is the reference or command. On the ATV61 Drive check the F4 function key to see if you are in LOC or REM mode. If you are in LOC mode you will need to put the drive in REM mode before you can control it over Somove.
Released for: Schneider Electric Canada
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and en expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.