Why are there 2 coils for LC1F1700?
Issue:
Why does the LC1F1700 use two coils
Product Line:
IEC Contactors - GIC Product
Environment:
US Product
Cause:
Product specifications
Resolution:
Two coils are used to balance the device as it is too long for a single coil. Both coils are wired in series at roughly half (or slightly less) of the control voltage used so that the voltage is split evenly between the two coils.
Why does the LC1F1700 use two coils
Product Line:
IEC Contactors - GIC Product
Environment:
US Product
Cause:
Product specifications
Resolution:
Two coils are used to balance the device as it is too long for a single coil. Both coils are wired in series at roughly half (or slightly less) of the control voltage used so that the voltage is split evenly between the two coils.
Released for: Schneider Electric Canada
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and en expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.