How can I prevent an ATV630 drive from running in reverse?
Resolution:
You can prevent an ATV630 drive from running in reverse by disabling the reverse command in the drive parameters.
Follow these steps using the keypad:
- Go to Menu 5 – Complete Settings
- Navigate to Submenu 5.5 – Command and Reference
- Locate the Reverse Disable parameter
- Set the parameter to Yes
Once enabled, the drive will only allow forward operation and will ignore any reverse command from local or remote control sources.
If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:
Frequently Asked Questions - Schneider Electric (se.com)
If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us atdrive.products.support@se.comto create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Released for: Schneider Electric Canada
