Why XVUC29P doesn't work?
Please check the following points:
1. check wiring diagram.
Note: If customer use XVUC9VP, it must be mounted in the bottom layer, then mount XVUC29P, and then mount single color light.
2. Please debug the pulse signal of PLC output with oscilloscope. the frequency must be 500ms. and the pulse signal definition for each command as below:
3. If it still doesn't work, please send back the product to us for expertise or refer to FAQ "How to use pulse signal unit XVUC29P?".
1. check wiring diagram.
Note: If customer use XVUC9VP, it must be mounted in the bottom layer, then mount XVUC29P, and then mount single color light.
2. Please debug the pulse signal of PLC output with oscilloscope. the frequency must be 500ms. and the pulse signal definition for each command as below:
3. If it still doesn't work, please send back the product to us for expertise or refer to FAQ "How to use pulse signal unit XVUC29P?".
Released for: Schneider Electric Canada
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and en expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.