Video: What filler plate is used and how does it install to fill the main circuit breaker opening in QO and Homeline, low amp, convertible main load center covers?
Issue:
Product Design Features
Product Line:
QO and Homeline Load Center
Resolution:
The low amp (100-125 A max.) QO (single phase) and Homeline load centers that use a QOM1 main breaker will use the filler plate part number QOM1FP.
The attached video is ONLY to supplement the INSTRUCTIONS that come with the kit. PLEASE make sure to read the instructions and all the below safety information that is located in the instructions BEFORE working on any electrical equipment.
A PDF copy of the complete instructions is attached below the video.
Make sure to turn OFF ALL power supplying the equipment and verify the power is OFF using a properly rated voltage sensing device, BEFORE working on or with electrical equipment.
1) Once all safety steps are followed, begin the installation of the main breaker opening filler plate by following the instructions.
2) Install the filler plate (A) from the front of cover (B) by pressing into place as shown
NOTE: PLEASE READ ALL INSTRUCTIONS AND SAFETY INFORMATION THAT COME WITH THE KIT AND NEVER WORK ON ENERGIZED EQUIPMENT.
Product Design Features
Product Line:
QO and Homeline Load Center
Resolution:
The low amp (100-125 A max.) QO (single phase) and Homeline load centers that use a QOM1 main breaker will use the filler plate part number QOM1FP.
The attached video is ONLY to supplement the INSTRUCTIONS that come with the kit. PLEASE make sure to read the instructions and all the below safety information that is located in the instructions BEFORE working on any electrical equipment.
A PDF copy of the complete instructions is attached below the video.
Make sure to turn OFF ALL power supplying the equipment and verify the power is OFF using a properly rated voltage sensing device, BEFORE working on or with electrical equipment.
1) Once all safety steps are followed, begin the installation of the main breaker opening filler plate by following the instructions.
2) Install the filler plate (A) from the front of cover (B) by pressing into place as shown
NOTE: PLEASE READ ALL INSTRUCTIONS AND SAFETY INFORMATION THAT COME WITH THE KIT AND NEVER WORK ON ENERGIZED EQUIPMENT.
Released for: Schneider Electric Canada
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and en expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.