Why does frame size 6 ATV630 or ATV930 Process Drive not have mounting holes for a flange mount kit?

Issue:
Wondering why does frame size 6 ATV630 or ATV930 Process Drive not have mounting holes for a flange mount kit

Cause:
Re-design of drive.

Resolution:
When the ATV600 and 900 series drives were released, there were no flange kit available for frame size 6 drives, so the drive were not drilled and tapped to mount the kit.  The drives have been re-designed recently to have mounting holes pre-drilled and tapped to attach a flange mounting kit.  Currently, (June 2021) there is not factory flange kit available for frame size 6, but pre-drilled and tapped holes are included on the drive so that a custom made flange kit can be attached to the drive.  Currently there is no confirmed plans to produce a factory flange kit for this frame size drive but this may change in the future.

If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:

Frequently Asked Questions - Schneider Electric (se.com)

If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us atdrive.products.support@se.comto create a case with our Technical Support Team.

If you are not located in North America, please contact your local Customer Care Center for assistance:

Support | Schneider Electric Global (se.com)

Released for: Schneider Electric Canada