Issue:
Customer is trying to find information on how to install a 9001K2108 Speed pot.
Product line:
Push Buttons and Operator Interface
Environment:
9001K, 9001SK potentiometer
Cause:
Wiring
Resolution:
See the attached Instruction bulletin for the Speed pot. Typical speed pot wiring is Positive, Negative and Wiper contacts. Positive goes to the power supply, typically +10VDC. The Negative goes to the Common terminal. The Wiper is the output signal.
For the 9001 series, we use Terminals 1 (Positive), 2 (Wiper) and 3 (Negative).
If you find the speed pot is not outputting the correct voltage, try reversing terminals 1 and 3 (Negative and Positive).
Customer is trying to find information on how to install a 9001K2108 Speed pot.
Product line:
Push Buttons and Operator Interface
Environment:
9001K, 9001SK potentiometer
Cause:
Wiring
Resolution:
See the attached Instruction bulletin for the Speed pot. Typical speed pot wiring is Positive, Negative and Wiper contacts. Positive goes to the power supply, typically +10VDC. The Negative goes to the Common terminal. The Wiper is the output signal.
For the 9001 series, we use Terminals 1 (Positive), 2 (Wiper) and 3 (Negative).
If you find the speed pot is not outputting the correct voltage, try reversing terminals 1 and 3 (Negative and Positive).
Released for:Schneider Electric Canada
