What potentiometer does Schneider-Electric recommend for Altivar drives?

Issue :
Speed potentiometer that Schneider-Electric recommend for Altivar drives.

Resolution :
Any pot within the specification of the drive should work.  For all of our Drive products a potentiometer between 2.5kOhm and 10kOhm will do.  The part number ATVPOT25K - 22mm once used for our drives but it may no longer be available.
Below are some of the readily available part numbers typically used with Schneider drives :

For 22mm
Metal - XB4BD912R10K
Plastic - XB5AD912R10K

For 30mm
Metal - 9001K2108
Plastic - 9001SK2108

If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:

Frequently Asked Questions - Schneider Electric (se.com)

If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us atdrive.products.support@se.comto create a case with our Technical Support Team.

If you are not located in North America, please contact your local Customer Care Center for assistance:

Support | Schneider Electric Global (se.com)

Released for: Schneider Electric Canada