Can I use an LTMR Tesys T product to convert between Ethernet IP and Modbus RTU?
Issue:
Customer has an Ethernet IP control network and a device that will communicate Modbus RTU only. They want to use the Tesys T as a protocol bridge to control the Modbus RTU device.
Product Line:
Tesys T LTMR product.
Environment:
All Ethernet modes, All serial numbers.
Cause:
No information on this configuration available in current literature.
Resolution:
It is not recommended. Portions of this configuration may work but some portions may not. This has not been tested for compatibility or reliability and cannot be recommended. A dedicated Protocol Bridge should be used in this situation.
Customer has an Ethernet IP control network and a device that will communicate Modbus RTU only. They want to use the Tesys T as a protocol bridge to control the Modbus RTU device.
Product Line:
Tesys T LTMR product.
Environment:
All Ethernet modes, All serial numbers.
Cause:
No information on this configuration available in current literature.
Resolution:
It is not recommended. Portions of this configuration may work but some portions may not. This has not been tested for compatibility or reliability and cannot be recommended. A dedicated Protocol Bridge should be used in this situation.
Released for: Schneider Electric Canada
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and en expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.