Can the Altivar 320 (ATV320) Run a Motor Above 60 Hz?

Yes. The Altivar 320 (ATV320) can operate a motor above 60 Hz if the application and motor are designed to support higher speeds.

To configure the drive:

1. Navigate to CONF > FULL > SIM-.
2. Set tFr (Maximum Frequency) to a value greater than 60 Hz.
3. In the SIM- menu, set HSP (High Speed) to the desired operating frequency.
4. Ensure that HSP does not exceed the tFr value.

Note: Before increasing the operating frequency above 60 Hz, verify that the motor and driven equipment are rated for the higher speed to avoid equipment damage or unsafe operation.

If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:

Frequently Asked Questions - Schneider Electric (se.com)

If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us atdrive.products.support@se.comto create a case with our Technical Support Team.

If you are not located in North America, please contact your local Customer Care Center for assistance:

Support | Schneider Electric Global (se.com)