Can I Assign a Second Run Forward Command to an Altivar Process Drive?
Resolution:
No. Only DI1 (Digital Input 1) can be assigned to the Run Forward function on Altivar Process drives.
The Run Forward command is reserved for DI1 and cannot be assigned to any other digital input. As a result, it is not possible to configure a second digital input with the same Run Forward command.
If additional start controls are required, they must be combined through external control logic and wired to DI1.
If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:
Frequently Asked Questions - Schneider Electric (se.com)
If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us atdrive.products.support@se.comto create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Released for: Schneider Electric Canada
